3D printed model in 1/50 scale -   Dimensions (L x W x H): 59.50 mm x 48.5 mm x 51.5 mm Scope of delivery: 1 x 10 ft material container Color: sandyellow, BAUMANN livery Material: PLA plastic - Heat resistant up to approx. 50 degrees Celsius

3D printed model in 1/50 scale -   Dimensions (L x W x H):48,5mm x 44mm x 45 mm Scope of delivery: 1 x 8 ft material container Color: sandyellow, BAUMANN livery Material: PLA plastic - Heat resistant up to approx. 50 degrees Celsius

3D printed model in 1/50 scale -   Dimensions (L x W x H): 122 mm x 48,5mm x 51,5 mm Scope of delivery: 1 x 20 ft office container Color: light grey Material: PLA plastic - Heat resistant up to approx. 50 degrees Celsius

3D printing model in scale 1/50 -   Note: The vehicle and containers shown are for illustrative purposes only and are not included in the scope of delivery.   Scope of delivery: 1x roll-off frame (compatible with the Conrad roll-off tipper, among others)   Dimensions: Length 122 mm, width 40 mm, height 38 mm   Color: Silver   Material: Plastic (PLA) – heat-resistant up to approx. 50 degrees

3D printed model in 1/50 scale -   Dimensions (L x W x H): 60 mm x 48.5 mm x 51.5 mm Scope of delivery: 1 x 10 ft sanitary container Color: light grey Material: PLA plastic - Heat resistant up to approx. 50 degrees Celsius

3D printing model in scale 1/50 - Dimensions: total height 30.5mm (without base) - Scope of delivery: 10 warning beacons, 10 feet, 10 lamp bases, 10 orange lights and 10 red lights Colour: white/red | Feet in anthracite, lamp base in yellow, lights in transparent orange, -red - Material: plastic (PLA) - heat-resistant up to approx. 50-60 degrees

3D printed model in 1/50 scale -   A highly detailed, medium-length open tarpaulin designed to retrofit or complement the flatbed of the 1:50 scale MAN TGE. Suitable for the Conrad MAN TGE flatbed truck with a double cab.   The tarpaulin simply slots onto the existing side panels and can be removed at any time if needed. Thanks to its precise fit, no additional fastening is required.   Give your MAN TGE model an even more realistic look and enhance your collection with this perfectly fitting accessory.   Note: The cab protection grille must be removed beforehand.   Dimensions: 32mm x 41mm x 25mm Scope of delivery: 1 tarpaulin suitable for the Conrad MAN TGE flatbed truck with double cab Color: Light gray Material: Plastic (PLA) – heat-resistant up to approx. 50°C

3D printed model in 1/50 scale -   A highly detailed, closed tarpaulin designed to retrofit or complement the flatbed of the 1:50 scale MAN TGE. Suitable for the Conrad MAN TGE flatbed truck with a double cab.   The tarpaulin simply slots onto the existing side panels and can be removed at any time if needed. Thanks to its precise fit, no additional fastening is required.   Give your MAN TGE model an even more realistic look and enhance your collection with this perfectly fitting accessory.   Note: The cab protection grille must be removed beforehand.   Dimensions: 70mm x 41mm x 25mm Scope of delivery: 1 tarpaulin suitable for the Conrad MAN TGE flatbed truck with double cab Color: Light gray Material: Plastic (PLA) – heat-resistant up to approx. 50°C

3D printed model in 1/50 scale -   A highly detailed, opened tarpaulin designed to retrofit or complement the flatbed of the 1:50 scale MAN TGE. Suitable for the Conrad MAN TGE flatbed truck with a double cab.   The tarpaulin simply slots onto the existing side panels and can be removed at any time if needed. Thanks to its precise fit, no additional fastening is required.   Give your MAN TGE model an even more realistic look and enhance your collection with this perfectly fitting accessory.   Note: The cab protection grille must be removed beforehand.   Dimensions: 70mm x 41mm x 25mm Scope of delivery: 1 tarpaulin suitable for the Conrad MAN TGE flatbed truck with double cab Color: Light gray Material: Plastic (PLA) – heat-resistant up to approx. 50°C

3D print model in 1/50 scale -   Scope of delivery: 1 x generator (ready-made model)   Dimensions (LxWxH): 57 mm x 22 mm x 40 mm (incl. exhaust)   Material: Plastic (PLA) – heat-resistant up to approx. 50 degrees

3D print model in 1/50 scale -   Scope of delivery: 1 x generator (fully assembled model) with trailer Note: The jockey wheel is supplied unpainted in grey.   Dimensions (LxWxH): Generator: 57mm x 22mm x 40mm (incl. exhaust) / Trailer: 87x30x13mm (length incl. drawbar / height excluding jockey wheel)   Material: Plastic (PLA) – heat-resistant up to approx. 50 degrees

3D printing model in scale 1/50 -   Dimensions: 24.5 mm x 17 mm x 19.5 mm   Scope of delivery: 3 wire mesh boxes   Color: Wire mesh box: silver / Base: sand-yellow/silver   Material: Plastic (PLA) – Heat-resistant up to approx. 50 degrees

3D printing model in scale 1/50 -   Scope of delivery: 20 ceiling supports, 1 transport rack   Dimensions: Ceiling support length 34 mm / Transport rack (LxWxH) 25x15x17 mm   Material: Ceiling supports: Resin / Transport rack: Plastic (PLA) – heat-resistant up to approx. 50 degrees

3D printing model in scale 1/50 -   Dimensions: 18mm x 18mm x 20.5mm   Box contents: 5 big bags in a storage box.   Color: White (unpainted)   Material: Resin (model making) Production: 3D printing (SLA)

3D printing kit in scale 1/50 -   Hall footprint dimensions (WxDxH): 220mm x 280mm x 130mm / Door opening (WxH): 80mm x 85mm / Roof overhang: 15mm (sides), approx. 25mm (front and back)   Scope of delivery: Kit includes 4 walls, roof (incl. gutters and 4 downpipes), 2 roller doors, windows, and clear sheets for windows/doors   Color: Walls: white / Roof: silver / Windows & doors: anthracite   Material: Plastic (PLA) – heat-resistant up to approx. 50°C

3D printing model in scale 1/50 -   Scope of delivery: 2 x transport boxes (1 x silver and 1 x anthracite) – lids are not attached.   Dimensions (L x W x H): 38 mm x 12 mm x 17 mm   Material: Plastic (PLA) – heat-resistant up to approx. 50°C

3D printing model in scale 1/50 -   Scope of delivery: 2 x transport boxes (1 x silver and 1 x anthracite) incl. 2 tubes – lids and tubes are not pre-assembled.   Dimensions (LxWxH): Total width 38 mm / Box 27 x 12 x 17 mm / Tubes can be cut to custom lengths.   Material: Plastic (PLA) – Heat-resistant up to approx. 50 degrees.

3D printing kit in scale 1/50 - Mat 120 x 47mm (39x15 fields), height 0.5mm, bar width 0.3mm Colour: brown Material: plastic (PLA) - heat-resistant up to approx. 50-60 degrees

3D printing kit in scale 1/50 - Scope of delivery: 6x DN800 pipes - color: gray

3D printing kit in scale 1/50 -   Measure (LxH): 60mm x 22mm

3D printing kit in scale 1/50 -   Measure (LxH): 60mm x 22mm

3D printing model in scale 1/50 - </br> Dimensions: total height 38mm - </br> Scope of delivery: 1 tarpaulin, can be represented open or closed - </br> Colour: grey - </br> Material: plastic (PLA) - heat-resistant up to approx. 50-60 degrees

3D printing model in scale 1/50 - </br> Dimensions: total height 38mm - </br> Scope of delivery: 1 tarpaulin, can be represented open or closed - </br> Colour: anthracite - </br> Material: plastic (PLA) - heat-resistant up to approx. 50-60 degrees

3D printed model in 1/50 scale -   Dimensions (L x W x H): 59.50 mm x 48.5 mm x 51.5 mm Scope of delivery: 1 x 10 ft material container Color: light grey Material: PLA plastic - Heat resistant up to approx. 50 degrees Celsius